Head cover(Outer blades), Cutting head(Inner blades), Cleaning brush, back of the brush(a Flat-head screwdriver)
Turn the bottom part of TAN counterclockwise to disassemble the cleaning brush.
Use the screwdriver on the back of the cleaning brush to unscrew.
Without completely pulling the screw out, pull the top part upwards.

1. Insert the nose hair trimmer "TAN" inside one of your nostrils for about 1/4"(5mm).
2. Hold the top part of the trimmer and gently rotate from side to side the bottom for 4 to 5 times.
3. If needed, reposition the trimmer and repeat as explained in 2.
4. After use, turn the bottom part counterclockwise to remove the brush attachment and use the brush to sweep the blade.

Keep the product in a dry place. If kept in a humid place, it may get rust or erosion.
After rinse, make sure the nose hair trimmer is completely dried before it is reassembled and stored away.
Use the brush attachment to remove the clinging hairs on the blades.
You may clean the trimmer under running water or with a piece of tissue damped with alcohol.

ROYAL's nose hair trimmer is a manual product that does not need to be charged nor does it require batteries and can be used semi-permanently.
Because nose hairs are an immune system of the body that protect against external harmful substances, only the long-grown parts should be cut.
The product smoothly cuts nose hairs through 12 patented double blades, and safely trims the appropriate amount of nose hairs through an outer rod (head cover).

The lubricant used in ROYAL’s nose hair trimmer is not an industrial oil, but an expensive lubricant used in food manufacturing which is harmless to the human body and differs greatly from the smell of industrial oil.
However, if you are uncomfortable with using the product, you can wash the product with water or wipe the inner rod with tissue for a more comfortable use.

Lubricants are included during manufacturing of ROYAL’s nose hair trimmers to make storage and use more convenient.
This lubricant is an expensive lubricant used in food manufacturing facilities and is harmless to the human body.
However, when the metal parts of the nose hair trimmer rub against each other and get on this lubricant, it can make the lubricant look darker than the original color.
You can rest assured because it is not harmful to the human body, but if you feel uncomfortable using it, wipe the lubricant off with running water or a cloth.

ROYAL’s nose hair trimmer is a waterproof product that can be cleaned with water.
Clean the product with water and store in a dry place after it is completely dry to extend the life of the product.

Yes, because TAN:Bshell is a product made of brass and has antibacterial properties, it is safe from germs and viruses.

A: You get stains due to sweat or oil on the surface. To avoid stains, it is recommended to wash the product after use and dry it thoroughly after washing with water.

How to remove a stain
1. Put toothpaste on a toothbrush or cloth and clean the product with it.
* Cleaning with toothpaste will make the toothbrush or cloth black. This is brass oxide coming off by toothpaste. Wash it thoroughly with water after cleaning.
2. Clean with vinegar and salt (baking soda)
* Mix vinegar and salt(baking soda) in the proportion of 2:1, apply it to the cloth and wipe off. However, wipe off for no longer than 5 mins and wash thoroughly with water.

TAN:Bshell is a product made of brass and has antibacterial properties.
TAN and TAN:Bshell have slight differences due to the material, but in terms of durability and usability, it can be used for long time without much difference depending on how the user uses and manages the product.

Hold the outer rod (head cover) and pull it up to disassemble it from the inner rod (head).

An updated version of TAN, BON has a better cutting power and is bigger in size for people with large hands.
In addition, unlike TAN, BON has a built-in cover with a lid so it can be carried without a separate protective device or pouch.

Nail clippers for professionals usually have straight nails. HON uses straight blades because curved blades can cut nails large, thereby causing cracking, splitting, and lifting.

Of course. In particular, HON's straight blades can prevent ingrown toenails, and thus it is even better.

HON's silicon catcher is a device to prevent the flying away of nails, but the product still can be used after removing it without compromising the performance of the product.